Milk Bar
900054.jpg
900054-cb-side-view.png
900054-cb5-above-2.png
900054-cb5-above.png
900054-cb5-below.png
900054-cb5-image-1.png

Calf Buddy™ 5 - 50L

Product No. 900054

Fitted with Calf Buddy™ Teats to control milk flow, the Calf Buddy™ 5 is the perfect feeder for hutches.Very robust and with a high capacity, the teats are forward facing to give calves in group hutches space.The height and handle adjustable hooks allow the perfect height no matter what type rail you have.The Calf Buddy™ 5 is ideal for calf hutches, or group pens that have headlock gates.

Fitted with Calf Buddy™ Teats to control milk flow, the Calf Buddy™ 5 is the perfect feeder for hutches.

Very robust and with a high capacity, the teats are forward facing to give calves in group hutches space.

The height and handle adjustable hooks allow the perfect height no matter what type rail you have.

The Calf Buddy™ 5 is ideal for calf hutches, or group pens that have headlock gates.

The Calf Buddy™ 5 Hooks are height and handle adjustable for the perfect custom fit on your farm.

Measure the height of your rails

Attach the hook to the feeder body using the height indicator.

Attach the Swivel Handle to the hook depending on the type or rail you have.

Feed the calves!

When to Replace

Calf Buddy™ Teats control the flow for around 120 feeds. Best practice is to use the One Teat - One Calf rule. New calf = new teat. When the calf is weaned, remove the worn teat and replace with new for the next calf.

If you are using one bucket for multiple calves then managing the teats as you would your milking liners helps maintain a consistent, controlled flow and takes away guess work.

A simple calculation will tell you when to replace the teats: 120 ÷ feeds per day ÷ 7 = weeks until replacement.

For example, if the teat is used twice a day, replace it every 8.5 weeks: 120 ÷ 2 ÷ 7 = 8.5 weeks.

If the teat is used four times a day, replace it every 4.2 weeks: 120 ÷ 4 ÷ 7 = 4.2 weeks.

How to change

Calf Buddy™ Teats have a pull through design to sit snugly against the feeder wall for optimum hygiene. This is the most hygienic connection system in hutch buckets, and with the 1 Click connection, it is also easy to change!

  1. Connect the teat to the Calf Buddy™ Connector, making sure the teat and connectors line up.

  2. Pull the teat through the hutch bucket.

  3. Using an up and down motion, pull the teat through the bucket until you hear the 'click'.

Finally, be sure to check the teat alignment is correct and the slit is vertical!

Removing a worn teat

  1. Place your hand inside the bucket and pull the connector upwards until it disconnects from the teat.

  2. Remove the worn teat and discard it.

  3. Wash the connector and insert it into a new Calf Buddy™ Teat. So easy!

Milk contains both fat and protein, which can form biofilm. This biofilm can give bacteria a perfect enviroment to multiply, even when a surface looks clean. Effective cleaning must remove both fat and protein.

Rinse equipment soon after feeding so milk does not dry onto the surface.

Use warm water and a suitable detergent rather than very hot water. Hot water can set or bake milk protein onto the equipment.

Calf Buddy™ Teats are made from high-quality natural rubber, so they should be cleaned with a non-chlorine detergent. Chlorine-based detergents damage natural rubber, reducing teat life and performance.

Clean thoroughly at least twice a week, and rinse after every feed. Regular cleaning removes milk fat and protein before they form biofilms that allow bacteria to grow, helping maintain excellent hygiene for every feed.

  1. Rinse with water.

  2. Apply a gentle, non-chlorine detergent as directed.

  3. Lightly brush the outside while bending each teat so detergent reaches the inner wall.

  4. Rinse thoroughly.

Calf Buddy™ Teats do not need to be removed for cleaning!

Comes fitted with Calf Buddy™ Teats and Connectors.

Volume: 50L

Length: 765mm

Height: 400mm

Width: 370mm

Optional Lid - Code 900055

Blanking Plugs - Code 900011

Warranty

Two-year warranty with proof of purchase, excluding consumable items such as teats and hooks.

NZ Pat Apps 757655, 767633, 727000, 787005.

NZ Des Reg. 420972 PCT Patent Applications

NZ2016/050190 & NZ2020/050110 International

Patents and Designs pending or apply.

Lorem ipsum dolor sit amet consectetur

Related products