Milk Bar
900002.jpg
900002-calf-buddy-starter-1.png
900002-calf-buddy-starter-2.png
900002-calf-buddy-starter-3.png
900002-calf-buddy-starter-hutch-bucket.png

Calf Buddy™ Starter Pack

Product No. 900002

A complete set of Calf Buddy™ Teats and Connectors to get you started with controlling the flow in hutch buckets and improve calf perfomance! Each pack contains:10 Calf Buddy™ Teats 10 Calf Buddy™ ConnectorsSimply connect the teats and connectors and pull through your exsisitng hutch buckets to improve calf digestion.

A complete set of Calf Buddy™ Teats and Connectors to get you started with controlling the flow in hutch buckets and improve calf perfomance!

Each pack contains

10 Calf Buddy™ Teats 10 Calf Buddy™ Connectors

Simply connect the teats and connectors and pull through your exsisitng hutch buckets to improve calf digestion.

Insert the Connector into the back of the Calf Buddy™ Teat and pull through your hutch bucket. Use the aligning wings to make sure the slit is positioned vertically.

When to Replace

Calf Buddy™ Teats control the flow for around 120 feeds. Best practice is to use the One Teat - One Calf rule. New calf = new teat. When the calf is weaned, remove the worn teat and replace with new for the next calf.

If you are using one bucket for multiple calves then managing the teats as you would your milking liners helps maintain a consistent, controlled flow and takes away guess work.

A simple calculation will tell you when to replace the teats: 120 ÷ feeds per day ÷ 7 = weeks until replacement.

For example, if the teat is used twice a day, replace it every 8.5 weeks: 120 ÷ 2 ÷ 7 = 8.5 weeks.

If the teat is used four times a day, replace it every 4.2 weeks: 120 ÷ 4 ÷ 7 = 4.2 weeks.

How to change

Calf Buddy™ Teats have a pull through design to sit snugly against the feeder wall for optimum hygiene. This is the most hygienic connection system in hutch buckets, and with the 1 Click connection, it is also easy to change!

  1. Connect the teat to the Calf Buddy™ Connector, making sure the teat and connectors line up.

  2. Pull the teat through the hutch bucket.

  3. Using an up and down motion, pull the teat through the bucket until you hear the 'click'.

Finally, be sure to check the teat alignment is correct and the slit is vertical!

Removing a worn teat

  1. Place your hand inside the bucket and pull the connector upwards until it disconnects from the teat.

  2. Remove the worn teat and discard it.

  3. Wash the connector and insert it into a new Calf Buddy™ Teat. So easy!

Milk contains both fat and protein, which can form biofilm. This biofilm can give bacteria a perfect enviroment to multiply, even when a surface looks clean. Effective cleaning must remove both fat and protein.

Rinse equipment soon after feeding so milk does not dry onto the surface.

Use warm water and a suitable detergent rather than very hot water. Hot water can set or bake milk protein onto the equipment.

Calf Buddy™ Teats are made from high-quality natural rubber, so they should be cleaned with a non-chlorine detergent. Chlorine-based detergents damage natural rubber, reducing teat life and performance.

Clean thoroughly at least twice a week, and rinse after every feed. Regular cleaning removes milk fat and protein before they form biofilms that allow bacteria to grow, helping maintain excellent hygiene for every feed.

  1. Rinse with water.

  2. Apply a gentle, non-chlorine detergent as directed.

  3. Lightly brush the outside while bending each teat so detergent reaches the inner wall.

  4. Rinse thoroughly.

Calf Buddy™ Teats do not need to be removed for cleaning!

Pack Size: 10

10 Calf Buddy™ Teats 10 Calf Buddy™ Connectors

Calf Buddy™ Teats come in recyclable packaging.

Calf Buddy™ Teats are made from a the highest grade natural rubber.

Milk Bar™ Teats are protected by patents and registered designs, reflecting decades of innovation dedicated to improving calf health and feeding performance.

NZ Pat Appln 787055 PCT Patent Application PCT/NZ2020/050110 EU Design 001449680-0001 International designs apply. International Patents pending or apply.

Lorem ipsum dolor sit amet consectetur

Related products