Milk Bar

Milk Bar™ 1 4L

Product No. 910120

Fitted with an easy-change teat system the Milk Bar™ 1 4L interstacks for more effcient handling and storage.The Milk Bar 1 4L stacks with the teats fitted so you can carry multiple feeders to the calf pens and reduce storage space. The teat is locked into place with two arms making this easy change teat system offers an alternative for users who find pull-through teats difficult to change. Gradients are marked every 250 ml for easy, accurate measuring and there is no waste with the low milk channel. Fitted with a Milk Bar™ Teat to maximise saliva production and a self locking catch.

Fitted with an easy-change teat system the Milk Bar™ 1 4L interstacks for more effcient handling and storage.

The Milk Bar 1 4L stacks with the teats fitted so you can carry multiple feeders to the calf pens and reduce storage space. The teat is locked into place with two arms making this easy change teat system offers an alternative for users who find pull-through teats difficult to change. Gradients are marked every 250 ml for easy, accurate measuring and there is no waste with the low milk channel. Fitted with a Milk Bar™ Teat to maximise saliva production and a self locking catch.

Hang the Milk Bar™ 1 4L on rails or pipes up to 25mm wide. Don’t force the feeder onto a wider rail as it can result in cracking the base of the hook.

Rail Height

To give your calves the best drinking position, hang the Milk Bar™ 1 4L on a rail around 85cm high. This puts the teat at 65cm which is the optimum height for calves and helps the oesophageal groove to close.

The Milk Bar™ 1 can be fitted with a Milk Bar™ Training Teat or a Milk Bar™ Teat.

When to Replace

Milk Bar™ Teats control the flow for around 120 feeds. This figure is influenced by cleaning regimes, as the natural rubber gradually absorbs milk fat and protein. With use, the teat softens and the flow increases - calf behaviour will indicate when the teats have become soft and need replacement! As the milk flow increases they will start to suck on each other or their surroundings (cross-suckling). As soon as you start to see cross-suckling, change your teats to prevent the next stage of fast flow - diarrhoea.

However - managing the teats as you would your milking liners helps maintain a consistent, controlled flow and takes away guess work.

A simple calculation will tell you when to replace the teats: 120 ÷ feeds per day ÷ 7 = weeks until replacement.

For example, if the teat is used twice a day, replace it every 8.5 weeks: 120 ÷ 2 ÷ 7 = 8.5 weeks.

If the teat is used four times a day, replace it every 4.2 weeks: 120 ÷ 4 ÷ 7 = 4.2 weeks.

Replace immediately if calves start gulping or cross-suckling.Good teat management helps maintain good calf digestive health.

How to Change

Milk Bar™ 1 4L has a conveniant teat change system. Open the 'arms' remove the teat. Replace with a new Milk Bar Teat or Milk Bar Training Teat and click the arms back into place to secure the teat.

Milk contains both fat and protein, which can form biofilm. This biofilm can give bacteria a perfect enviroment to multiply, even when a surface looks clean. Effective cleaning must remove both fat and protein.

Rinse equipment soon after feeding so milk does not dry onto the surface.

Use warm water and a suitable detergent rather than very hot water. Hot water can set or bake milk protein onto the equipment.

Milk Bar™ Teats are made from high-quality natural rubber, so they should be cleaned with a non-chlorine detergent. Chlorine-based detergents damage natural rubber, reducing teat life and performance.

Clean thoroughly at least twice a week, and rinse after every feed. Regular cleaning removes milk fat and protein before they form biofilms that allow bacteria to grow, helping maintain excellent hygiene for every feed.

  1. Rinse with water.

  2. Apply a gentle, non-chlorine detergent as directed.

  3. Lightly brush the outside while bending each teat so detergent reaches the inner wall.

  4. Rinse thoroughly.

The Milk Bar™ 1 4L comes ready to use with a Milk Bar™ Teat and self locking catch

Volume: 4L

Weight: 700gms

Length: 210mm

Height: 210mm

Width: 210mm

Replacment Milk Bar™ Black Self Latching Hook available Code: 950208

Replacement Milk Bar™ 1 4L Teat Attachment Kit Code: 900110

Optional Lid - Code 910104

Warranty

The feeder has a two year warranty with proof of purchase.

The warranty does not apply to consumable parts (teats and hooks). Made from food grade polyethylene and U.V Stabilised for long life.

Lorem ipsum dolor sit amet consectetur

Related products