Milk Bar™ Lamb/ Kid Ad Lib 9
Product No. 929600
Using an ad lib system has great benefits to lambs and kids but is tough on the teats. In this feeder, the teats are positioned at the top of the feeder to prevent them leaking.With small stomachs it is preferable to feed lambs and kids several times a day. This is not always practical and so using an ad libitum system can be the best option for your farm.However, lambs and kids dish out harsh punishment on teats, they have sharp teeth and bite the rubber making ad libitum difficult in a gravity feeder.With Ezi Lock Hooks you can secure the Milk Bar™ Ad Lib 9 to the rail, it will stay there all day.The teats are higher than the milk level and are fitted with tubes that sit in the base of the milk channel. If animals bite the teats, there is no milk loss.
Using an ad lib system has great benefits to lambs and kids but is tough on the teats. In this feeder, the teats are positioned at the top of the feeder to prevent them leaking.
With small stomachs it is preferable to feed lambs and kids several times a day. This is not always practical and so using an ad libitum system can be the best option for your farm.
However, lambs and kids dish out harsh punishment on teats, they have sharp teeth and bite the rubber making ad libitum difficult in a gravity feeder.
With Ezi Lock Hooks you can secure the Milk Bar™ Ad Lib 9 to the rail, it will stay there all day.
The teats are higher than the milk level and are fitted with tubes that sit in the base of the milk channel. If animals bite the teats, there is no milk loss.
With Ezi Lock Hooks you can hang this feeder on anything from wooden rails to steel gates.
Hang the feeder in place, lock the hooks and fill with milk.
To give your lambs and kids the best drinking position, hang the feeder on a rail around 60 - 70cm which puts the teats at around 25cm which is the optium height for them and helps the oesophageal groove to close and milk to bypass the rumen.
Changing the teats
Pull the Milk Bar™ Teat into the feeder.
Push the tube into the back of the teat.
IMPORTANT: Do not use a non-return valve on the tube. A non-return valve increases the flow of milk and can leave calves at risk of digestive upsets.
Changing the bottle teat
The softer compound makes it easier to pull theTraining Teat from the bottle.
Grip the bottle with your knees.
By hand or with pliers, pull the teat firmly to the side, Or using a sharp blade, cut the teat at the base.
Place the new teat into the hole and pull-through. Be sure check the teat is aligned correctly and the slit is vertical.
Volume: 36L
Weight: 3kg
Length: 700mm
Height: 400mm
Width: 300mm
Fitted with Milk Bar™ Teats.
Optional Lid - Code 962501
Warranty
Two-year warranty with proof of purchase, excluding consumable items such as hooks and teats.