Milk Bar
901100.jpg
901100-trainer-bottle-1.png
901100-trainer-bottle-2.png

Milk Bar™ Training Bottle

Product No. 901100

A well balanced bottle with a comfortable carry handle and to train young calves. Fitted with Milk Bar™ Training Teat to support young calves.Getting the first few feeds right is important to the overall performance of the calf and the Milk Bar Training Bottle is designed to support those early feeds. Carefully balanced to reduce arm fatigue when bottle feeding calves, it is fitted with the Milk Bar™ Training Teat which uses a combination of controlled flow with a softer rubber formulation for training young calves or supporting weaker calves. The teat design encourages the correct suckling action so calves produce enough saliva to boost immunity.

A well balanced bottle with a comfortable carry handle and to train young calves. Fitted with Milk Bar™ Training Teat to support young calves.

Getting the first few feeds right is important to the overall performance of the calf and the Milk Bar Training Bottle is designed to support those early feeds. Carefully balanced to reduce arm fatigue when bottle feeding calves, it is fitted with the Milk Bar™ Training Teat which uses a combination of controlled flow with a softer rubber formulation for training young calves or supporting weaker calves. The teat design encourages the correct suckling action so calves produce enough saliva to boost immunity.

The Milk Bar™ Training Bottle is designed to be used in two feeding positions.

Standing behind the calf. This position is ideal for young or weak calves. By straddling the calf, you can gently hold them in position with your legs.

Standing in front of the calf. Once calves are feeding confidently, you can switch position and stand in front of the calf. This prepares her for drinking from a fence hanging feeding.

After a few feeds, your calf should be ready to move onto a fence hanging feeder fitted with Milk Bar™ Teats. Changing to the more controlled flow of the Milk Bar™ Teat safeguards calves against the harmful effects of fast feeding.

How do I change the bottle teat?

The softer compound makes it easier to pull the Milk Bar™ Training Teat from the bottle.

Grip the bottle with your knees.

By hand or with pliers, pull the teat firmly to the side, Or using a sharp blade, cut the teat at the base.

Place the new teat into the hole and pull through. Be sure check the teat is aligned correctly and the slit is vertical.

When to Replace

Milk Bar™ Training Teats activate saliva production for around 100 feeds which normally trains 16 calves. This figure is influenced by cleaning regimes, as the natural rubber gradually absorbs milk fat and protein. With use, the teat softens and the flow increases.

Managing the teats as you would your milking liners helps maintain a consistent, controlled flow.

A simple calculation will tell you when to replace the teats: 100 ÷ feeds per day ÷ 7 = weeks until replacement.

The most simple way to manage this is to diarise when new teats were installed and diarise when they need replacing.

Replace immediately if calves start gulping or cross-suckling. Good teat management helps maintain good calf digestive health.

How to Change

Milk Bar™ Training Teats have a hygienic pull-through design that fits tightly against the feeder wall to minimise milk build-up.

Correct installation is important: position the slit vertically for optimum performance.

Teat Tool: The quickest and easiest removal method.

By hand: Pull the teat straight up or down—not directly outward.

Cutting: Use a sharp blade away from your body. Fit the replacement with the slit vertical.

Milk contains both fat and protein, which can form biofilm. This biofilm can give bacteria a perfect enviroment to multiply, even when a surface looks clean. Effective cleaning must remove both fat and protein.

Rinse equipment soon after feeding so milk does not dry onto the surface.

Use warm water and a suitable detergent rather than very hot water. Hot water can set or bake milk protein onto the equipment.

Milk Bar™ Teats are made from high-quality natural rubber, so they should be cleaned with a non-chlorine detergent. Chlorine-based detergents damage natural rubber, reducing teat life and performance.

Clean thoroughly at least twice a week, and rinse after every feed. Regular cleaning removes milk fat and protein before they form biofilms that allow bacteria to grow, helping maintain excellent hygiene for every feed.

  1. Rinse with water.

  2. Apply a gentle, non-chlorine detergent as directed.

  3. Lightly brush the outside while bending each teat so detergent reaches the inner wall.

  4. Rinse thoroughly.

Comes fitted with a Milk Bar™ Training Teat.

Volume: 3L

Weight: 600gms

Length: 350mm

Height: 150mm

Width: 120mm

Warranty

The feeder has a two year warranty with proof of purchase.

The warranty does not apply to consumable parts (teats and hooks).

Made from food grade polyethylene and U.V Stabilised for long life.

Lorem ipsum dolor sit amet consectetur

Related products